CUCC Expeditions to Austria: 1976 - 2022
Home
|
CUCC
|
expo.survex
|
Handbook
|
Log in
264
|
290
|
359
|
Survex
|
All Survex
|
Scans
|
Upload Scans
|
Drawings
|
Upload Drawings
|
Upload Photos
|
290 (FGH)
|
264 (Balkonhöhle)
|
Data Issues
|
tasks to do
|
caves
|
QMs
|
ents
|
expoers
|
survey lengths
|
statistics
|
Wallets(2022)
|
Expo(2022)
|
Control panel
|
Survex File: caves-1623/264/pubicsynthesis
*begin pubicsynthesis *export 1 5 ; Cave:Balkonhohle (264) ; Area in cave/QM: Hiltiaplenty *title "Pubic Synthesis" *date 2015.07.29 *team Insts Jacob Podesta *team Notes Martin Green *team Tape Martin Green *instrument Compass Red Silva, Clino Yellow #3 ; Calibration: 204 146/+43 148/+41 146/+41 327/-42 327/-43 325/-43 *ref 2015#24 *calibrate tape +0.30 ; +ve if tape was too short, -ve if too long ; Centreline data *data normal from to tape compass clino backcompass backclino *begin *sd compass backcompass 2 degrees *sd clino backclino 1.5 degrees 1 2 7.01 032 +30 208 -33 *end *begin *sd compass backcompass 1 degrees 2 3 3.66 036 +17 218 -17 *sd compass backcompass 2.5 degrees 3 4 4.24 045 +26 220 -26 *end 4 5 6.15 274 -11 - - *begin *sd compass backcompass 2.5 degrees *sd clino backclino 2.5 degrees 4 6 2.39 106 +34 291 -39 *end 6 7 2.90 016 +29 - - 6 8 3.68 229 -23 - - ;----------- ;recorded station details ;(PM=Pencil Mark, LHW/RHW=Left/Right Hand Wall) ;Station left right up down description ;LRUDs arranged into passage tubes ;new *data command for each 'passage', ;repeat stations and adjust numbers as needed *data passage station left right up down 1 1.8 5.0 - 0 ;c-shaped lump of floor below rope 2 0.2 1.3 0.8 0.9 ;PM LHW 3 0.2 1.0 2.2 0.3 ;PM LHW 4 0.1 0.9 0.6 0.5 ;PM LHW 6 - - 2.4 0.9 ;PM far wall t-junction 7 - - - - ;end of passage, unmarked 8 - - - - ;end of passage, unmarked ;*data passage station left right up down ;[ 1 1.3 1.5 5.3 1.6 ] ;[ 3 2.4 0 3.4 0.2 ] ;----------- ;Question Mark List ;(leave commented-out) ; The nearest-station is the name of the survey and station which are nearest to ; the QM. The resolution-station is either '-' to indicate that the QM hasn't ; been checked; or the name of the survey and station which push that QM. If a ; QM doesn't go anywhere, set the resolution-station to be the same as the ; nearest-station. Include any relevant details of how to find or push the QM in ; the textual description. ;Serial number grade(A/B/C/X) nearest-station resolution-station description ; None ;------------ ;Cave description *end pubicsynthesis
No differences - file was saved