CUCC Expeditions to Austria: 1976 - 2022
Home
|
CUCC
|
expo.survex
|
Handbook
|
Log in
264
|
290
|
359
|
Survex
|
All Survex
|
Scans
|
Upload Scans
|
Drawings
|
Upload Drawings
|
Upload Photos
|
290 (FGH)
|
264 (Balkonhöhle)
|
Data Issues
|
tasks to do
|
caves
|
QMs
|
ents
|
expoers
|
survey lengths
|
statistics
|
Wallets(2022)
|
Expo(2022)
|
Control panel
|
Survex File: caves-1623/136/136-correct
Included files:
main
ents
chile/chile
forbiden
gravel
footconn
; note that the Forbidden Land is far more safely accessible via Steinschlag ; than through the Stairway to Hell, so all this survey data is now here, ; rather than under a 161 area. Hence the HotMC/Rocky interface is the ; 136:161 interface, rather than 136.gods/ElinA. However, the 136 prefix ; is only applied (inside the 136.136 file) to the vertical part of 136 up ; to the link to Elin Algor. ;*export p136 ; from 136 ;*export p136b ; from MorEnt ;*export p136c ; from MorEnt ;*export p136d ; from MorEnt ; 136:surface interface *equate 136.entrance.1 p136 ; other 136 entrances. *equate 136.MorEnt.19 p136d *equate 136.MorEnt.15 p136c *equate 136.MorEnt.21 p136b *entrance p136 *entrance p136b *entrance p136c *entrance p136d *begin 136 *title "Steinschlagschacht, 1623/136" ; connection to 144 *export chile.runnybowels.1 *export entrance.1 *export entrance.10 *export MorEnt.10 *export MorEnt.15 *export MorEnt.19 *export MorEnt.21 *export hotmc.1 *include main ; These two points aren't the same - they're on neighbouring boulders ; They need to be connected to process 136 alone, without surface data, but ; can be correctly disconnected for normal dataset processing ;LRUDs ;entrance.10 3 0 1.00 ~30.00 CM RH wall ;MorEnt.10 3 2.5 ~18 4 '10' red point on rock point ;approx connection ;*equate MorEnt.10 entrance.10 ;process 136-standalone.svx where this is done. *include ents *equate gods.1 ElinA.13 *equate Gravel.22 tyrolia.5 *equate footconn.1 theatre.5 *equate footconn.5 footlights.12 ; chile area *equate footlights.9 chile.oatso.14 *include chile/chile *include forbiden *include gravel *include footconn *end 136
No differences - file was saved