Survex File: caves-1623/264/gosserwager4

*begin gosserwager4

; stations linked into other surveys (or likely to)
*export x	4

; Cave: Balconhohle
; Area in cave/QM: North of Ice Cock labyrinth
*title "Gosser Wager 4"
*date 2015.08.10
*team Insts Nathan	
*team Notes George
*team Pics George
*team Tape Nathan
*instrument DistoX (Brendans)
; Calibration: unknown
*ref 2015#70

; Centreline data
*data normal from to length bearing gradient ignoreall
x	1	1.81	336.7	-45.4
1	2	10.22	028.2	-70.1
2	3	3.71	349.9	-11.4	
3	4	20.47	066.7	-83.3

;-----------
;recorded station details (leave commented out)
;(NP=Nail Polish, LHW/RHW=Left/Right Hand Wall)
;Station Left Right Up Down Description
;[Red] nail varnish markings
;x	0	0.50	1.30	7.7 ; RHW
;1	0.4	0.5	2.8	10.9	;	LHW slot
;2	2.7	0	10.3	1.3	;	RHW
;3	0	0.8	14.8	20.8	
;4	0.7	1.6	18.1	1.2	;	LHW spike

;LRUDs arranged into passage tubes
;new *data command for each 'passage',
;repeat stations and adjust numbers as needed
*data passage station left right up down 
x	0	0.50	1.30	7.7 ; RHW
1	0.4	0.5	2.8	10.9	;	LHW slot
2	2.7	0	10.3	1.3	;	RHW
3	0	0.8	14.8	20.8	
4	0.7	1.6	18.1	1.2	;	LHW spike

;-----------
;Question Mark List  ;(leave commented-out)
; The nearest-station is the name of the survey and station which are nearest to
; the QM. The resolution-station is either '-' to indicate that the QM hasn't
; been checked; or the name of the survey and station which push that QM. If a
; QM doesn't go anywhere, set the resolution-station to be the same as the
; nearest-station. Include any relevant details of how to find or push the QM in
; the textual description.
;Serial number   grade(A/B/C/X)  nearest-station  resolution-station  description
;[ QM1    A    surveyname.3    -    description of QM ]
;[ QM2    B    surveyname.5    -    description of QM ]

;------------
;Cave description  ;(leave commented-out)

*end gosserwager4

No differences - file was saved

CUCC Expeditions to Austria: 1976 - 2022

Survex File: caves-1623/264/gosserwager4