CUCC Expeditions to Austria: 1976 - 2025

Survex Template - will save as file 'gpx/2023/svx/garlic-col.svx'

; *** THIS IS A TEMPLATE FILE - NOT WHAT YOU MIGHT BE EXPECTING *** *** DO NOT SAVE THIS FILE WITHOUT RENAMING IT !! *** ;[Stuff in square brackets is example text to be replaced with real data, ; removing the square brackets] *begin [surveyname] ; stations linked into other surveys (or likely to) *export [1 8 12 34] ; Cave: ; Area in cave/QM: *title "" *date [2040.07.04] ; <-- CHANGE THIS DATE *team ["Albert Aadvark"] Tape ; <-- CHANGE THE NAMES, in quotes if more than one word *team [Badger] Notes *team ["Fred Fossa"] insts *team [Grumpy] Pics instrument [SAP #+Laser Tape/DistoX/Compass # ; Clino #] ; Calibration: [Where, readings] *ref [2040#00] ; <-- CHANGE THIS TOO ; the #number is on the clear pocket containing the original notes ; if using a tape: *calibrate tape +0.0 ; +ve if tape was too short, -ve if too long ; Centreline data *data normal from to length bearing gradient ignoreall [ 1 2 5.57 034.5 -12.8 ] ;----------- ;recorded station details (leave commented out) ;(NP=Nail Polish, LHW/RHW=Left/Right Hand Wall) ;Station Left Right Up Down Description ;[Red] nail varnish markings [;1 0.8 0 5.3 1.6 ; NP on boulder. pt 23 on foo survey ] [;2 0.3 1.2 6 1.2 ; NP '2' LHW ] [;3 1.3 0 3.4 0.2 ; Rock on floor - not refindable ] ;LRUDs arranged into passage tubes ;new *data command for each 'passage', ;repeat stations and adjust numbers as needed *data passage station left right up down ;[ 1 0.8 0 5.3 1.6 ] ;[ 2 0.3 1.2 6 1.2 ] *data passage station left right up down ;[ 1 1.3 1.5 5.3 1.6 ] ;[ 3 2.4 0 3.4 0.2 ] ;----------- ;Question Mark List ;(keep initial semi-colon on each line) ; The nearest-station is the name of the survey and station which are nearest to ; the QM. The resolution-station is either '-' to indicate that the QM hasn't ; been checked; or the name of the survey and station which push that QM. If a ; QM doesn't go anywhere, set the resolution-station to be the same as the ; nearest-station. Include any relevant details of how to find or push the QM in ; the textual description. ;Serial number grade(A/B/C/D/X) nearest-station resolution-station description ;[ QM1 A surveyname.3 - description of QM ] ;[ QM2 B surveyname.5 - description of QM ] ;TICKed off QMs ; if another survey exists, the resolution-station field (the dash) was filled in, e.g. ;[ QM2 B surveyname.5 anothersurvey.7 description of QM and description of progress ] ; and if it crapped out with no survey, then just repeat the station name: ;[ QM2 B surveyname.5 surveyname.5 description of QM and description of why it crapped out ] ;------------ ;Cave description ;(leave commented-out) ;Freeform text describing this section of the cave ; more free form text ; lots of descrition please. It will be copied and pasted into the Cave data page. *end [surveyname]

Identified login

Who are you?

underground survey length: 0.00 metres
cave primary survexfile
directory primary survexfile
Cannot find any dated survex blocks in this survex file (not looking at *include files).
Report this to a nerd if you think this is incorrect.

---